This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Refer to Table A for camera numbers. All boxes contain a symbol as shown in Figure 10. If necessary, repeat steps 1-10to program the activity detection mask for other cameras. Records all cameras For the simplex multiplexer, the multiplexer must be in record connected to the multiplexer. The sequence will run until ers connected to a 2.
Refer to the multiplexer server manual for instructions. To set individual inputs, refer to the Camera Setup section. Only one multiplexer can be master; all others must be slaves. If you play back the tape on the same equipment, any covert picture will still appear blanked. Twisting head for zoom control.
The monitor will show only the camera number on a black background; however, the videotape will record what the camera sees. This is not an undo key. To program the 16-cameradisplay: 1. An alarm or activity detection will override the camera you are watching. An alarm or activity detection will override the camera you are watching.
Continued on next page Table E. If you have a server, the multiplexer address must match the input on the server to which it is connected. The Record Setup menu appears. There are many options available including Scribus, pdfTex, Adobe InDesign, Adobe Illustrator as well as. The currently selected menu item blinks.
Start random scan With the system in auto scan, press 97 on the number keyboard, Starts random scanning. Monitors to be on a multiplexer s. Sequencing appears on the monitor affiliated with the keyboard; for example, if the keyboard is set for address 1, the sequence appears on monitor 1. Refer to Table A for camera numbers. You must be in main monitor mode to program from the keyboard. The Summary of the content on the page No.
To program an activity detection mask for a camera: 1. While recording, all cameras are being recorded simultaneously. To program the is installed, you must enter multiplexer server, refer to the server manual. Press the to call up a nine-cameradisplay. You can record only when in record mode. Connecting Keyboards to the Server If the keyb Summary of the content on the page No. In paired mode, keyboards 2 and 4 are not used.
Use the joystick to move among items on the screen. Use the joystick to move among items on the screen. The keyboard receives power from the multiplexer. Also is used to program a pattern. To sequence groups of cameras, press the key below the 4- or 9-screen icon, and then go to step 5.
When motion is detected, the multiplexer shows and records that camera s more frequently. Activity Detection Mask Activity detection continually monitors selected camera inputs for motion. Repeat pressing to display other groups. To set individual inputs, refer to the Camera Setup section. However there is no guarantee that the interference will not occur in a particular installation. Exit the Advanced System Setup menu.
The switch interval can be changed only while in this setting. Tabl Summary of the content on the page No. As more cameras have activity, the frequency at which they are shown and recorded decreases. Use the joystick to move to each camera location in the nine-cameradisplay. For example, multiplexer 1, cameras 1-16;multiplexer 2, cameras 1-16,etc. This is the default operation of the keyboard and will ensure optimal joystick performance. You can record while viewing any or all cameras.