Follow the instructions on the screen to complete the color correction. In the Maximum Number of Search Results box, type the maximum number of addresses that will appear which match the search criteria selected by the user. . By default the Ethernet Port Configuration will be set to Auto. The up and down arrow keys provide access to additional selections and return you to the current selections display. Touch Close until the Tools tab is displayed. Touch the Change Settings button.
Click Apply, then reboot the device following the prompt. Red Hat® is a registered trademark of Redhat, Inc. Continue with the next procedure to set Authentication Configuration. Place a check mark in the box in front of the Certificate you wish to view details for. To access Parallel Port Settings at the Device 1. If prompted, enter the administrator user name and password. Enter a name for the print queue such as raw.
After the device has been authenticated, it will be accessible to users on the network. Note: If entering a fully qualified host name for example, ldapserver. Click the Machine Digital Certificate Management hot link in the Security folder on the Properties page of Internet Services. On the Port Number screen, use the supplied keypad to enter the appropriate port number default of 80. Note that if you changed any settings in the Protocol Settings menu, the Device will automatically reboot to register and enable your new settings. To exit the Port Settings menu, returning to the Device's Tools tab screen, press the rectangular Close button in the upper right corner of the Port Settings menu screen.
In the test report, the WorkCentre 7345 is praised for its large touch screen interface, color network scanning system, and overall device ease of use and convenience. . Note that the exporting of certificates is accomplished using the Trusted Certificates Management hot link under Security folder on the Properties page of Internet Services. To order the kit, contact your Xerox representative. If so, purchase a new drum unit assembly from a trusted seller. Providing additional security during the Public Key negotiating process, Digital Certificates can alternatively be used in place of the Shared Secret, to encrypt the Public Key information being exchanged between communicating parties.
They may have an undocumented solution for tabs. Solaris and Java are trademarks of Sun® Microsystems. In the Group column, touch Authentication. Our goal is to provide you with a quick access to the content of the user manual for Xerox WorkCentre 7345. Select Yes to print a test page. Go to the Print Drivers section of this guide for the instructions required to set up individual desktop workstations to communicate with the Device. Contents - index of all tips concerning the Xerox 7345, that we can find in the current document 3.
Click the symbol to the left of the Security folder. . . You will have to either get this printer repaired or replace it. .
AppleTalk, LaserWriter, and Macintosh are trademarks of Apple Computer, Inc. Configuration on a Computer The following describes the configuration for a remote, networked computer. Press the selection line labeled Port Status. . Click Apply, then reboot the device at the prompt.
For information on how to export a certificate, refer to the CentreWare Internet Services online help. Now, power off the machine and disconnect the power cable from the power source. Table of Contents Network Connectivity. Note: The correct port to use is 443. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
The auto gradation routine will run and a message will display upon completion. You can find easily everything what do you need. Wait several seconds and the Auto Clear service should log you out. This method is used primarily for Server certificates. To access Internet Services Settings at the Device 1. Place a check mark in the box in front of the Certificate you wish to view details for. The machine will be unavailable for a short period of time.